Multifunctional counter

Hengstler 0772132

• Universell applicable as tachometer, timer shift-counter, batch-counter ...
• Most simple handling
• 4 different coloured backlight versions
• For the first time the intensity of the backlight is adjustable
• Impressive, clearly readable display in 48x48 mmInput frequency up to 60 kHz
• Easy installation due to pluggable terminals
• 3 Presets

Display LCD reflective,Transflective positiv: black figures on back lighted groundTransmissive negativ: white, red or green figures on black ground2 lines, counter reading/presettings 6-digits;decimal point (up to 4 decimals)

Digit hight 1st line 9.3 mm; 2nd line 7.2 mm

View angle12 o’clock

Supply voltage SELV: 12-30 VDC; protected against polarity reversal24 VAC, 50/60 Hz, ± 10% / 115 VAC, 230 VAC, 50/60 Hz, ± 10%

Current consumption12 ... 30 VDC: < 200 mA, 24 VAC < 250 mA; including sensor supply115 / 230 VAC < 50 mA; incl. Sensor supply

Power consumption< 5 W Duty cycle 100%

Overload protectionexternal fuse DC: 0,16 AT (IEC 127);DC: 0,2 AT (UL 198)24 VAC: 315 mAT230 VAC: 32 mAT; 115 VAC: 63 mAT

Overload protection external fuse 230 V, 2,5 mAT

Relay output

Sensor supply Only for AC operation: 12-24 VDC load-dependent; max. 50 mA

Storage of values NV-memory > 10 years

Electrical connections Plug-in screw-type connections / terminals

Cable cross-section 1...1.5 mm² with wire-end sleeves

Amplitude threshold < 2 V and > 8 V or < 1 V and > 4 V at TTL-levelamplitude max. 40 VDC

Active edge programmable, positive for PNP-input, negativ for NPN-input